Today I took the parts of the storage battery truck into work and used the valve shop blaster to glass bead blast them. It went fast, granted I was only cleaning the parts up, not removing paint. I was glad that the epoxy was difficult to blast off. The Jeffrey letters stayed put also.
When I got home I set up the garage to paint. I put the first layer of primer on, of course too heavy, and have a couple runs. Nancy has volunteered to help me by painting, if I sand away my runs.
We hung the body of the storage battery truck from the rafters on the garage with the bike lock cable.
Thursday, April 10, 2014
sandblast and paint
Sunday, April 06, 2014
Leverage
Today after a good long nap cut short by my purring cat I came downstairs and cut two little brackets to hold my control lever. Drilled two 1/8th inch holes and bolted them together, ground them to size on the bench grinder, cleaned them up with a file and sandpaper and attached them to the storage battery truck. Seeing the lever attached makes me smile.
And if someone hits the lever, it will fall away, because it is held on with magnets.
The rest of the truck is disassembled waiting painting. The weather is to be above 60 from Wednesday on. Paint, paint, paint, and some more painting. Then the final assembly will begin. May 17th is not that far away.
Saturday, April 05, 2014
Utility flat Center Sills & My arms hurt
This morning I cut the utility flat center sills. Not that big of a task but I forgot to check for the factory end of the tube. They shear cut it, which deforms the end. Sure enough I had not removed it. I took my little propane heater and warmed the area up, then set a block on it and beat it into the correct shape. Was not that hard at all. I then drew up the axles for Robb to make and emailed them off to him.
I also set up to cut the floors for the other two utility cars. One will be a gon for Jonathan to ride in. The other I don't know. Then I dressed the manequinns. And since the battery in my circular saw needed to be charged I added some more racks for small steel to the steel rack.
Then I saw the start at the control lever. I figured with nothing better to do I would try to cut the slots for the bike cable barrel. That went so well I started to file and smooth out the body of the lever. After several hours for filing, and sanding with 100, 200, and 360 grit sandpaper the thing looks pretty good. Nancy says it is as good as what I would get from shapeways.
It is now time to take some advil and go sleep. My arms hurt from all that repetitive motion.
Friday, April 04, 2014
Utility flat bolsters
tonight after sleeping through an audio kids book two CDs long with the kids jumping around the living room I came down stairs and cut the 8 body bolsters for the utility flats. Each is 2.5 inches wide and 7 inches long.
One thing that helped speed up the process was setting up a stop block after I cut the first one. Not having to measure and adjust the placement each time was a time saver.
I will wait until tomorrow to cut the other two centersills to length. I am wondering about leaving one of them long so I can have a caboose or passenger car with steps down at the end.
Thursday, April 03, 2014
Small Stuff
I spent the evening breaking all the sharp edges on all the small parts to the storage battery truck. I think the paint will stick better around the corners now.
Wednesday, April 02, 2014
Nancy Stained
Several coats to get a nice rich dark color.
Monday I did not blog or update my facebook photo.
I had the privilege of removing the last layer.
Saturday, March 29, 2014
Sand and stain
Today I assembled the top of the storage battery truck and sanded it. Then I disassembled the top and sanded each board individually. I used 120, 220 and 320 grit sand paper. Chamfering all 12 edges of each board. Then I reassembled the top and handed it off to Nancy to stain.
In between was a fight to get the 4 pins of the top to go smoothly in. One time it would go fine, the next time three of the 4 pins would get hung up. I started out testing the pins after each board was added but it kept changing. I got smart and Anna and I put all the boards on, then I worked to make the pins all fit. I used two different drill bits to ream out the holes in the top straps and in the body of the truck. Now they glide in smooth. I also took the dremel and opened up the top strap holes just a titch.
The only other setback of the day is once I decided to turn around the machine, forgetting that the wheels were only held by gravity. I only lost the springs and alignment on one end, the motor 4 bar mechanism kept the axle from falling. I reassembled everything and installed the keepers, like I should have done a long time ago.
Saturday, March 01, 2014
back to design
Things are stalled on the storage battery truck while I wait for weather that is appropriate for painting outdoors. Meanwhile I have started working on the lathe lamp, and designing the flat cars. Other than spending lots of time filing on the control stick my efforts are limited to design, planning purchases, and purchases.
For example:
The lamp:
Purchase 1" ID black tube 6-8" long to hold bulb
Purchase stain
Purchase wood base
Purchase 4 wood or felt feet for under the wood base
Then I can do the final assembly.
Find a safe place to display the lamp.
For the storage battery truck:
Make throttle lever (Shapeways has 3D design, $85 to print, or I can file a steel one)
Buy paint, Ford Shadow Grey
buy stain, a redish brown same as lamp
sandblast entire thing
prime
paint
stain wood
do final assembly
make plywood cover for onboard large batteries
buy large batteries
buy auxiliary battery charger
buy control stick cable
make battery boxes
plan wiring
wire up drive system
Install brake wheel to pot
Find and install headlight
figure out and install sound system for required horn and bell
Buffalo Smelting works cars
design frame
design trucks
give design to Samson to weld up
pay lots of money for the welding
Spiral wheel cars
I have the eaton pedestals, and have drawn the side view into AutoCAD they look great together. Robb has programmed a path with the CNC and run a test in wood, it also looks great.
Design the body
I would like a flat car body option and make an On30 micro layout to display. The best would be to have a copy of the Storage Battery Truck and the spiral wheel cars. If I don't make the RR on this car I will make it on one of the other options.
Utility flats
Cut two more bodies.
Design arch bar trucks for under them
Design 4 wheel underbody version
Make box, gon and caboose version.
Other than making lots of utility flats, which I am limiting myself from, most of the tasks require better weather, purchases, and lots of design time. I have 8 4.125" dia wheel sets, that is either two archbar trucks or four 4 wheel trucks or two Buffalo Smelting Works cars.
Saturday, February 08, 2014
Sanding The Top
Yesterday and today I most of my time was spent not on the storage battery truck but on two flat cars. Both 48 inches long and 18 inches wide.
I did take the time to use the time to power sand the top of the storage battery truck today, went through 8 pieces of cheap sand paper. The top of each board now has a chamfer so it is more clear that they are individual pieces of wood. In addition, all the of the end steps have been broken over with the power sander.
Back to the flat cars. They are simple. 1-1/8th thick plywood from work, a band of 1x2 poplar around the outside. Two pine cross members underneath. Threaded through, from end to end, is a 1x2 x1/8th rectanglar tube center sill.
This is when I had the panic question, will wheels fit under it? Will I have to go back and gouge out the plywood for these cars to roll? Rather than measure and do a whole lot of math I decided to make a coupler pocket height gauge capable of supporting the car. Set to IBLS unloaded height it will tell me if my cars are good or if they need washers.
Monday, February 03, 2014
Control Stick
I could make if from wood.
I could 3D print it.
Sorry I have not 3D printed it yet. I am half done with the steel version. Because it is such a show piece I may draw up a 3D version to be printed. I am not certain I will do a good enough job with the steel version.