I weighed the roof down to keep the angle the same as the top of the body while the glue dries.
One of the CNW yards had a tramway in 1943. Not sure which CNW yard it is, I took the photo from the internet and saved it as 1943 CNW yard.
Friday night I glued the side banding in place.
Saturday I visited the O scale group and we did some work and a lot of planning.
Here are the roof section on Friday.
I am reading a book about narrow trains in england. The max speed of operation is the same as the gauge in inches. With freights at half that speed. 7.5" trains should then go about 7 to 8 mph, that I agree feels comfortable max. Though I would inverse that, slowing down with passenger loads, faster with less dynamic loading.
This trolley layout was started in the 80's.
Saturday night I sat in front of the TV and put the end edge pieces on.
Another photo of the car as of Sunday night. Next is to install the trusses to the underside of the roof. Only the center rib is glued and nailed currently. To keep the roof where i wanted it I pinned one side to the body, glued the center rib to the side, glued the second side, then pried up the roof removed the pins and squeeze out, then put it back into place.









No comments:
Post a Comment