Friday, June 03, 2022

Mockup

 

Here is the backside of the bench with the top resting on the upper cross bars.  
I have a choice to make.  Right now the width of the top is 25 inches.  That is less than a half inch each side of the vice.
To be that width i have one five board stack and one six board stack.   I can add one more two inch board and have a 27 inch wide top.  That would give more than an inch each side of the vice.
Nancy finished my computer bag.  It is a copy of a canvas bag i have had since childhood.  It is a soft leather, so it has a frumpy school boy bag look to it.  Just like I wanted.

Thursday, June 02, 2022

Glued Side Two


 I glued the second side together.   It is not a perfect match to the first side, but the top cross bars match, and the far side slope matches.   This end the slopes are different.

Wednesday, June 01, 2022

Side Two is Close

 But not close enough.

I have two issues.   The length is off by about 1/8th of an inch.  
The top cross member is 3/16" low at one end.  

It took me a while to figure out that it was not that the second set was out of square and several other issues.  It is only two.  Tomorrow I will cut some off the bottom of the tenon and glue it to the top.  That will move the cross member to the proper place.  Then I will draw everything tight and as I will have just adjusted the angles make a cut on the cheeks of the tenon with a saw.  With the leg as a guide that will make the end of the tenon match up nicely.

Then I can add the tenons to the top of the legs.  And chamfer all the edges like I did on the front legs.  Then I can glue up the rear leg set.

This project is progressing much faster than I thought it would.


Tuesday, May 31, 2022

Side One Together


Mini was encouraging me to stay on the couch.
Yep teacup dogs are a good stand in for a 1/8th scale horse.
Purple heart pegs.
Broke my rubber mallet.
I admit it is not the cleanest joints.
Nancy helped me glue up and we used 3 straps to hold it tight.

Started side two.

Sunday, May 29, 2022

Fixed the gap

There is some really nice looking grain that will be hidden.  This is the top of the top rail.  The top of the bench will hide this area.
Careful use of the chop and table saw made quick work of making the top rail the proper length with a new tenon.
Before this is glued I need to:

1. Drill the drawbore holes.

2. Make drawbore pins.

3. Make grove for the sliding deadman plate.

4. Make top tenons.  

I am thinking about making the back leg set before or after gluing the front one.  If I wait then I can modify both until they are a match.  If I glue I will have an unchanging master to copy.

 

Saturday, May 28, 2022

Found the Error

The bad news,  I have a gap.
The whole time I was putting together the first side.  I thought I had a small problem with the angles of the legs vs the sides.

I also have an issue with the height,  I was aiming for 36 inches.   It is 37.5, I know I had and extra inch on the bottom.  I plan to skim the top of the whole bench when done that will take away a 1/4 inch.  

This is my setup to make the tenons.  The smooth markerboard let me swing the far end around easily.

I thought this would take many hours, days to make the first side.  The first joint took a long time, I was more casual and faster on the each additional one.  

Sunday, May 22, 2022

Mortise

 

I was at a hobby shop and saw some very interesting trucks of 1/8th scale.   I have searched patents of 1880 to 1900 and did not find a similar design.  I have yet to take the time to search later time periods.
This is a house of david 15" locomotive getting ready for the 2022 season.
This is the Dallas Fort Worth O Scale bridge.  I am repairing it, replacing webbing.  I will be modifying the ends to allow modern traincars to be able to pass.
Reposting a photo of the parts for my workbench.





This bridge at House of David will remain dilapidated for the foreseeable future.

The past week was setting the width and depth and length and position of the mortis holes.

Jon and I went and saw a couple O scale railroads on Saturday.
I like O scale, the size is large enough for detail, but small enough for low cost.
This is a mullet river boxcar.  I think I would like one and exchange the end for something more novel.

The enclosed coach was built in wisconsin.
I used jigs to set side to side and width.
House of David trucks are interesting.
An example novel car end.