Wednesday, April 21, 2021

AV&W Spring 2021 Meet

At the meet I was able to enjoy a series of cars made by Bob Grey.
There were more steamers than electric or gas, I did not take pictures most of the day.


This gondola is one of the key cars that I would love to develop my own version of.


I need my own caboose.   I would like to have a match of large scale and O scale.  Parts of a Soo, CN&W, Pere Marquette, etc to be my own best of all features design.

The club loco, gas powered.
My train next to another with a ride trains chassis.

This propane car is nicely done.  He did it from well dried pallet wood.  
 

Monday, April 12, 2021

I had a large Pecan crotch firelog by the bandsaw since November.  It was really too big to cut on the bandsaw.   I started to cut it with a handsaw.  after 2" I figured that if I put my toolboxes around the saw it would extend the table.
My first cut had a curve to it.
The second cut was nice and flat
I made four slabs 2" thick
There were also some scraps because my saw has a 10" resaw capacity.  
I am not sure what I will do with the wood.
but they sure do look nice bookmatched
 

Monday, April 05, 2021

Rebuilding the Pink and Blue Flats

 Evaluating my Florida trip pictures makes me realize that while the pink and blue flats are useful they are not that photogenic with the rest of my equipment.   The tugger was updated several times, what was a childish looking train now looks mildly like a scale railbus.  Loco2 is also somewhat scale.   The flats at 18" wide were narrow gauge, much wider than the 15" of the rest of the equipment.  

I chose to cut 2.25" off each side and add back on a 1/2" side sill.   The final width ended up at 14.75 for one and 14.25 for the second, because I used thinner side sills.

The cars were then coated with black paint, the new wood getting two coats.




The GP35 was getting a metal cab.




With a planned event this weekend I will get photos of the three flats with the tugger and and Loco2.