Sunday, December 24, 2023

Vacuum Pump and fittings

 

A while back I purchased a used Edwards Speedivac ED150 and cleaned it up and made it run.   but the instructions had this weird complex drawing of stuff at the intake that we had no clue how to replicate.  We could not figure it out so I set it aside.   For years.



KF40


A standard vacuum fitting flange, like there is an ISO version of it.  The drawing, it is of a complex way to change from KF40 to a glass tube.




So now we need to figure out what fittings we need.

My first project is to glue wood table top tight.  So I need a plastic bag and vacuum fitting.

For example this one from Amazon.  
A ball valve that will fit on that that so I can close off the bag from the pump. 
A hose strong enough not to crush.
A KF40 to hose connection.

That is the bare minimum.  
We should also have a pressure release valve.  
A regulator would be nice.

Then do it all again for a vacuum pot for degassing 

Saturday, December 02, 2023

Mullet River Caboose Kitbash

I decided to build my Mullet river C&NW caboose kit.  But I thought it was too long.  So I shortened it by 4'.  Or to say it another way I took a difficult kit and made it more difficult.  
Some parts like the copula I made per instructions.  

I removed the window above the desk off the right side

I made some shelves.  It looks like they were added by a second rate carpenter out of warped wood.
The modified right side and unmodified left side.
The left side was easy as I could just shorten the end on the middle and outer layer.  The inner layer had to be cut behind the copula to keep the slots for the rafters aligned.

At the end of the week this is how it looks.  The left side is unmodified.  Long bunk, opening for a stove, the copula, and a toilet.  The bunks are supposed to have front boards, maybe the seats lift for storage, I made the storage accessable from the front without having to move cushions or people. 
With the roof on.
The right side is modified,  The one long bunk was cut into two 6.5' long bunks.
The desk was moved from the center of the car to the end of the car.  
I plan to put a little bin between the bunks for coal or wood.  Add cushions.  I am not a fan of lewd things but some kind of personal touch will be done.

A lot of work left to do.  Painting, gap filling, details, lighting, underframe, trucks, handrails, ladders, door knobs, stove, teakettle, coats, chair.  The underframe is urethane representing a steel frame.  I want to back date a bit and represent a wood frame with arch or andrews trucks.