Saturday, July 30, 2022
Moved Outside
Modifications of the 70 year old bridge to allow doublestack domestic containers is closer to completions than the start.
An impulse buy.
The next few steps on the workbench would produce a lot of dust. I chose to move the bench out to the garage and wait a few months for cool weather to finish it.
The view of the other end of the bridge.
I made the table into a cart, it helped, but not perfect.
An impulse buy.
The next few steps on the workbench would produce a lot of dust. I chose to move the bench out to the garage and wait a few months for cool weather to finish it.
The view of the other end of the bridge.
I made the table into a cart, it helped, but not perfect.
Tuesday, July 26, 2022
Glued
Today was race against the clock day.
Hammer it all apart.
Pour all the glue in the holes and spread it out and hurry to get all the joints tight.
I got it. But I forgot I wanted to chamfer the edges. I did not want to do it by hand, did not want to use router inside and clean up, did not want to router outside in the heat.
Monday, July 25, 2022
Sunday, July 24, 2022
Center Cross Brace
I started on the notches for the center cross brace. Used a router to hog out most of the material, then while finishing up with a chisel I scratched my thumb.
Jon helped by erasing some of my marks.
Cletus McFurland did a Chessie impression for most of the day.
Mini P. acted like dirty clothing, unless she was begging for food.
Use a mirror to see this image correctly. Eating less has helped reduce the double chin and tight pants.
Saturday, July 23, 2022
Table Mortise
I cut the mortise into the top
The bench looks good
I cut for each tenon specifically, measuring with the calipers
It took two passes with the router, first pass by hand and a second with a top bearing follower bit.
The pets woke me up this morning. Cooperating, telling us to feed them.
This workbench is progressing.
The bench looks good
I cut for each tenon specifically, measuring with the calipers
It took two passes with the router, first pass by hand and a second with a top bearing follower bit.
The pets woke me up this morning. Cooperating, telling us to feed them.
This workbench is progressing.
Friday, July 22, 2022
Mortise the fast way
Today was the first time I let Mini P into the back yard. She ate grass, horked it up again, then wandered around the yard like a lost old lady. She did find her bowl of food eventually and kept circling back to eat a bit more.
Progress continues on the workbench. The four sides of the tops are square with eachother. I need to set the tops down on the frame to do the final surfacing.I chose to do it the fast way. A router and Nancy with the shop vac to catch much of the dust. There was a lot in the air when done so I ran away.
I also picked up a sewing box. It is now populated with my train travel toolboxes, replacing two plastic shoeboxes. spare chains, couplers, etc. Not a complete kit but it is what I have been taking with me to every track for a few years now. Eventually I will have a specific shadow board of tools for each loco. I would hope to have the all the tools and oils for the steam engine on the steam engine tenders. We will see how practical that is in the long term. It may be a riding car as a toolbox for all.
Monday, July 18, 2022
Tops sanded
I paid wood world to thickness the tops of my workbench.
Then I have been squaring up the edges to the top face with handplanes.
No pictures yet, I accidentally reset my phone and have not installed the required apps yet.
The workbench is in the craft room as it has air conditioning. High today was 100 in the garage.
Subscribe to:
Posts (Atom)

.jpg)



















.jpg)





