Saturday, February 24, 2024

Box car red

I put the first coat of paint on the boxcar.   Nancy says it is a little too chalky red.

It is a very metameric color.
I put the handle on the curbies wagon.

 

Thursday, February 22, 2024

'leather' top table

We picked up this plywood and oak table from the side of the road.   It was last used as a craft table and had a half inch of paint on top.  

I used my planer to peal back the top and then sanded the edges and legs.


I used the legs to practice putting a weathered finish on for my boxcar.
The top MDF was stained then coated with wipe on poly.  Many layers of poly.  
My O scale caboose needs some lamps around the inside LEDs  I started by making a cap.
I fretted about that little nip at the end of the screw.  the one that scales to two thousands of an inch tall in O scale.  For way too long.  

 It took just as long to draw up a tank and chimney.   

Desk finish

Nancy put a liter of epoxy onto the top and into all the holes and cracks of the desktop.


A lot of pouring.
And a lot of sanding.

But it looks awesome.

Friday, February 16, 2024

Flexispot ready for top finishing


The desk is ready for the final coat on the top.
Nancy helped me wrap leather around the four blocks that close off the legs.








 She will then epoxy the holes in the top and apply finish to the oak.  Plus touchup the black on the metal that I scratched up.

Thursday, February 15, 2024

leather glued on

Bolted on the end metal.
Nancy glued the leather.
I cut out for the leg mounting pegs.
Nancy is wrapping the leg adapter blocks.
So we wont see the motors.
The electronics will slide in later.  I may make a panel to sit on top to support the leather.

Getting close to complete.

Tuesday, February 13, 2024

Ready for Leather

 I screwed in the angle.  And added filler between the angle.

I had to do some sanding and filing to smooth everything out.  Sadly that removed some of Nancy's great paint job.
We saw cirque du soleil crystal.  Nancy liked how they used the floor and wall as a screen for the projects.  They had trails following the people skating around like the hocky puck at a fight.  29 actors, plus 5 in the tech booth and who knows how many others.  
It was a work from home day so of course river had to invade my space.
Jack kept finding different traincars to sleep on.
I am going to try and not have an access panel of the leather.  But I am prepared to have one over the circuit board if I need to.
Nancy says that this show was better than disney on ice.  

Friday, February 09, 2024

Paint the desk

The list of tasks to complete the desk is getting shorter.  
The major thing  I did today was make the front angle sit better,  I pulled the wood too close and the angle would not fit in the rebate.  A wood rasp and a sharp chisel fixed that issue.  Then it was an hour of sanding the bottom with the random orbital sander.  And cleanup with hand sanding.
I also cleaned up the chamfers so the screws that will hold the metal to the desk seat well.  
 

Nancy took the metal parts and is painting them.  She used yellow primer.  I asked for them to be black to match the legs.  I have not pointed out that the bolts holding the metal in place are silver currently.  

I ground down the high nuts so that the leather will be smoother.  I also smoothed the corners of the bottom front and back edge.  I need to round over the ends yet, but will do that after the metal is in place.  

Tuesday, February 06, 2024

Custom Flexispot part 7

I am still to lazy to put the pictures in story order.
Yesterday I cut some 3" wide strips from nice plywood.  two of them 3/4" and one 1/2".  Then I cut in a bit to go under the angle.  
Today I cut a 5.5 degree angle on the wood to make a nice slope.  It taxed my table saw a bit because I had a fine tooth blade in there and cutting the full three inch height.  I but each board and took a break before cutting the next one to have a 50% duty cycle.  
I am finding lots of things funny lately.
This was the intention.  But by happenstance the cutoff of the middle row was perfect for use as the thinnest section.

While I would have liked to use a vacuum bag to glue this down I used glue and nails.  Then put weight on the thinnest part so it will have good adhesion to the base plywood.