Wednesday, October 25, 2023

Projects

  I was told not to work on the SBT programming for a while so I had to find other tasks.

One was a project I thought of for a while, a board shaped like Texas to carry tumblers for spirits.  
I made a template to use a router
The tumblers came from Marshals
The board is old growth teak that I wire brushed the front for a few hours to get nice looking.
The routed around a couple times to make a lifting edge
The end result is gifted to a united way auction basket.  Nice thing is it is paired with 5 liter of spirits so the auction is doing well.

A partial eclipse made for interesting shadows.
I also opened up the access to under the stairs so we could store more stuff in the house.

Projects I will never do.
cut the trunk off a 2007 towncar to make it look like the 1935 towncar.
Or replace the cab of a pickup with a small car.

Plans for O scale

 

A while back I showed the N scale I have,  I want to make Dioramas for to show off the few buildings an such that I have in N scale.  No need for a full on operating railway.  They could be part of a Freemo or ttrak modular group, maybe.
Now onto the On30 plans.   We (I) started a figure six layout with tall mountains with the idea that the kids would help run, build and such.  They never did.  I decided our space needed more flat storage than an unused railroad.   
At the same time I inventoried the On30, sold a bunch at the plano show, and have all the rest of the larger 4 axle equipment ready to sell at the O scale show.  What I will be left with is a bunch of porters, wood tippers, and shay and climax.  Plus a few pieces of equipment that can move people.   These all fit with my idea of a future operating railroad.

I also pulled a few of the plastic O standard equipment that could be surplus.  I have 10 wood freight car kits to build in that scale & gauge.  

I also inventoried the Live steam,  Pipsqeek, SBT, Mogul frame, and cars and talked about which are important and which are surplus.  Truthfully the two rolling standard gauge cars, and the unbuilt box car and Mogul are low on my desire list.

There are 7 model railroad ideas I have parts for here.
SBT train 1/4 scale on 7.5" track
Pipsqeek live steam train 1.5" scale on 7.5" track propane power
On30 tourist train
N scale diorama
O standard 15 car train
On30 operating railroad with 50 wood tippers
Mogul electric 1.6" scale and three freight cars and three riding cars.

I suspect I would have fun building the wood tipper railroad but after a couple years of ops I will be done with it as it is not that complicated.

It was cool to combine the 1/8th and smaller scales, I want to do that more.  The unbuilt boxcar I have here will be made in a way to be a diorama holder with lights overhead and viewing from the side, with the door opening and the entire side removable.  The diorama inside would have to be about 15" wide and 5' long.  This will work for the N scale diorama, or dioramas I want to build.  It is also a reasonable restriction to the On30 operational layout to build it in 15" x 5' sections.  I have always wanted to build bookshelf bases to hold a railroad on top.  While that does not work right now with the cats they could hold 15" deep railroad sections on top the same ones that would fit in the box car.

Other than live steam trains the longest I have had the same scenarized track is 5 years.  I expect that trend to continue, plan, build, enjoy, remove, plan, build...  Being sectional allows for better resource uses and storage.  I could build 10 section of a modular railroad, have 3 inside my home, the rest in storage, and then take all to a show.  Storage of small scale modules on the same format as live steam railcars gives flexible storage options for all trains.  

Monday, September 04, 2023

Roll Pitch Yaw part 3 Buck

 

I started on the wiring for the IMU.
The cats are taking over the trains
I am getting better at soldering wires to pins.  I tin both sides first then heat them up to set.  
After making the connector a loop I cut and applied the short end to the SBT.  

I can't have the IMU in with the motors, the razor is very susceptible to emp interference.  I will try having the IMU in a box on top of the SBT, or if I have to on the next car.  

Jon asked for cat stairs, that maybe he could use.  I think he has used rocks ten times in the past 3 years.  They hurt his feet.
The cats are taking over the trains.
Inspired by the kato mini diorama we took a look at all our N scale.

I was going to have Jon help me with the stairs build, but chose to do it myself.
He did remove the rocks that were in the way, Lilli vacuumed the area and Anna sanded the step treads.

Tuesday, August 29, 2023

Pitch, Roll, Yaw and Pin A1

 I found out that I cant do a digitalRead on an analog pin of the 9dof.

Once I used analogRead I am able to get the data saved to the log file.

Now I need to get the level converter so I can link this to my locomotive.

Also wondering if I should pay $30 for a GPS data logger to supplement this one.  The one I am looking at does not allow for saving external data, this one does.  I could save the GPS to this file.

Pitch, Roll, Yaw

 I am returning to an old project.

One of the challenges of the SBT is the small battery size, the way the sabertooth wants to use power,  desired speed, the grade and curvature of the track all influences battery life.  I bought the components to log pitch, roll, and yaw of the SBT, along with speed and direction, amp1 amp2 and battV.  This will give me a spreadsheet of performance for a trip.  I can then use that to refine the sabertooth settings.

I suspect the pacesetter favors battery life over performance, the sabertooth favors performance over battery life.  The first was designed for wheelchairs, the latter battle robots.  

The logging may gain me the ability to map a track.  

My current IMU is https://www.sparkfun.com/products/retired/14001

it has pitch, roll, and yaw to .01.  Thinking reasonably I only need accuracy to .1 or maybe .2.  This affords me the ability to take the data input and smooth it considerably.  Data recording rates of 1 per second to 200 times a second, again I think less is more so once a second should be enough, 10 if it looks like I need to remove errors.  

So the first goal is a chart that shows the battery voltage as influenced by desired speed and grade.  Amp readings should correlate to the other items.  I think this will be done in google sheets as that is my home spreadsheet.  

I may also be able to provide a 3d map of the track if I find the software to consume the data.  It would be best to have multiple passes around the track averaged.

It does not have a GPS function.  We have found that with trees and our phones the accuracy is quite low on GPS.

So far I have refreshed myself on running the IMU with default program, turning on and off what is logged.  Next step is to log data on the A0-A4 pins along with the position data.  

I need to buy a 3.3v to 5v converter to be able to consume the SBT data.

Saturday, August 26, 2023

New steam engines

My new steam locomotives arrived today. 

A Kemtron mogul and USRA 0-6-0 start.  I plan to keep the kemtron.  Not sure what will become of the other loco.
I bought a set of Kadee arch bar trucks at the show yesterday.  
This is a comparison of the mogul and Bachmann 2-8-0 in On30.   At one point I considered regauging the bachmann.  

Kemtron Mogul0-6-0Live Steam Mogul as 1.6Live Steam Mogul as 1.530" 2-8-0
Drive Wheel Diameter64.855.252.55636.96
Wheelbase13.7210.813.5914.59.92
Boiler Diameter64.865.76606452.8

The live steam mogul has wheel diameter matching the 0-6-0 and the wheelbase of the Kemtron.  

The show had a large N scale modular layout.  Part of it was T-track, part as N-trak, part of is as Fremo.  Because the standards are at different heights they had helixes to join them.
This is the tender that cam with the locomotives.  Very USRA mainline look to it.
Both new steam locomotives.
I also bought a few books and archbar trucks.
The T-track to N-trak helix.
The DFW O scale layout.
Humor of model railroaders
I was impressed by the small size of this decoder, I remember when they were fitting into N scale boxcars.
The Kemtron mogul.

NMRA 2023


 I showed off the SBT and 5 cars outside the DFW O scalers clubhouse this week.  having only 8 feet to move the loco is not much.   


After the show we loaded the whole train into my sedan for the ride home.  I will pick up the track another day.  

Saturday, August 05, 2023

Tanks 2.0

 

We decided to get a new garage door.  To do that we removed a lot of the smalls stuff to inside the house, then moved the big stuff to the back of the garage.   The two guys took 1.5 hours to remove the old one and install the new one, same opener, no gasket changing.
I decided to make the tanks run better by installing springs.
I did not bother cutting the thickness down on the parts as it adds more weight.  While I did surface all 4 sides they are 90 to eachother +- a degree or two.

The beams will be inset into the old wood.
I will make keeper plates to keep the bearings and springs in place.




I bought some inspiring pictures while up in Michigan and it inspired me to clean up my desk area.


The first tank is reassembled.  It is quite bouncy.  I cant wait until I can roll these down a track and see how the behave.  I think they will behave better than when they had no springs but I suspect they may give me some difficulty.


I used a forsner bit to clear a path for the bearing, then drilled and used my mill to clean up the path.  
The tanks platforms after the old chassis were cut off.
A new side frame.

The underside of a almost assembled car.   I need to make and apply the side spring keeper plates that go between the wheels and sideframes.