Tuesday, August 29, 2023

Pitch, Roll, Yaw and Pin A1

 I found out that I cant do a digitalRead on an analog pin of the 9dof.

Once I used analogRead I am able to get the data saved to the log file.

Now I need to get the level converter so I can link this to my locomotive.

Also wondering if I should pay $30 for a GPS data logger to supplement this one.  The one I am looking at does not allow for saving external data, this one does.  I could save the GPS to this file.

Pitch, Roll, Yaw

 I am returning to an old project.

One of the challenges of the SBT is the small battery size, the way the sabertooth wants to use power,  desired speed, the grade and curvature of the track all influences battery life.  I bought the components to log pitch, roll, and yaw of the SBT, along with speed and direction, amp1 amp2 and battV.  This will give me a spreadsheet of performance for a trip.  I can then use that to refine the sabertooth settings.

I suspect the pacesetter favors battery life over performance, the sabertooth favors performance over battery life.  The first was designed for wheelchairs, the latter battle robots.  

The logging may gain me the ability to map a track.  

My current IMU is https://www.sparkfun.com/products/retired/14001

it has pitch, roll, and yaw to .01.  Thinking reasonably I only need accuracy to .1 or maybe .2.  This affords me the ability to take the data input and smooth it considerably.  Data recording rates of 1 per second to 200 times a second, again I think less is more so once a second should be enough, 10 if it looks like I need to remove errors.  

So the first goal is a chart that shows the battery voltage as influenced by desired speed and grade.  Amp readings should correlate to the other items.  I think this will be done in google sheets as that is my home spreadsheet.  

I may also be able to provide a 3d map of the track if I find the software to consume the data.  It would be best to have multiple passes around the track averaged.

It does not have a GPS function.  We have found that with trees and our phones the accuracy is quite low on GPS.

So far I have refreshed myself on running the IMU with default program, turning on and off what is logged.  Next step is to log data on the A0-A4 pins along with the position data.  

I need to buy a 3.3v to 5v converter to be able to consume the SBT data.

Saturday, August 26, 2023

New steam engines

My new steam locomotives arrived today. 

A Kemtron mogul and USRA 0-6-0 start.  I plan to keep the kemtron.  Not sure what will become of the other loco.
I bought a set of Kadee arch bar trucks at the show yesterday.  
This is a comparison of the mogul and Bachmann 2-8-0 in On30.   At one point I considered regauging the bachmann.  

Kemtron Mogul0-6-0Live Steam Mogul as 1.6Live Steam Mogul as 1.530" 2-8-0
Drive Wheel Diameter64.855.252.55636.96
Wheelbase13.7210.813.5914.59.92
Boiler Diameter64.865.76606452.8

The live steam mogul has wheel diameter matching the 0-6-0 and the wheelbase of the Kemtron.  

The show had a large N scale modular layout.  Part of it was T-track, part as N-trak, part of is as Fremo.  Because the standards are at different heights they had helixes to join them.
This is the tender that cam with the locomotives.  Very USRA mainline look to it.
Both new steam locomotives.
I also bought a few books and archbar trucks.
The T-track to N-trak helix.
The DFW O scale layout.
Humor of model railroaders
I was impressed by the small size of this decoder, I remember when they were fitting into N scale boxcars.
The Kemtron mogul.

NMRA 2023


 I showed off the SBT and 5 cars outside the DFW O scalers clubhouse this week.  having only 8 feet to move the loco is not much.   


After the show we loaded the whole train into my sedan for the ride home.  I will pick up the track another day.  

Saturday, August 05, 2023

Tanks 2.0

 

We decided to get a new garage door.  To do that we removed a lot of the smalls stuff to inside the house, then moved the big stuff to the back of the garage.   The two guys took 1.5 hours to remove the old one and install the new one, same opener, no gasket changing.
I decided to make the tanks run better by installing springs.
I did not bother cutting the thickness down on the parts as it adds more weight.  While I did surface all 4 sides they are 90 to eachother +- a degree or two.

The beams will be inset into the old wood.
I will make keeper plates to keep the bearings and springs in place.




I bought some inspiring pictures while up in Michigan and it inspired me to clean up my desk area.


The first tank is reassembled.  It is quite bouncy.  I cant wait until I can roll these down a track and see how the behave.  I think they will behave better than when they had no springs but I suspect they may give me some difficulty.


I used a forsner bit to clear a path for the bearing, then drilled and used my mill to clean up the path.  
The tanks platforms after the old chassis were cut off.
A new side frame.

The underside of a almost assembled car.   I need to make and apply the side spring keeper plates that go between the wheels and sideframes.  



Monday, July 17, 2023

Spring Update

I made 4 shelf boxes for Lilli.
Because it is mid summer I made a mess of the living room and sanded them in front of the TV.
The troublesome tanks have been reduced so that I can rebuild.
I did not ride the loop trolley at St Louis
I did spend 4 hours in the City Museum.  the roof is not worth the additional fee.
The shelves will hold 12 boot boxes each.  One is designed for large stuff / display.  It may get LED lights.  
Nancy is painting the boxes lillian blue.

I did not run a steam engine this month.
This is my plan for the tanks.  Make new frames that hold the spring and bearing like this.
This is a very interesting seat.
4 wheel on the ground with a 1/4 bump.
I have to plan a way to keep the bearings in the right place.  
I also restarted my fusion 360 to think about pipsqeek.  I forgot how to use the tool.  Hand drawing may be easier.