Saturday, December 29, 2018

Electronics Inventory & Plans

Beyond all the basic resistors, capacitors, switches I have collected I have a few other items that I plan to use.

  1. Sabertooth 2x32 (2, one in Loco 2 one for SBT)
  2. Radio control system in Loco 2
  3. 6-12-24 volt backup charger meant for emergency lights in tugger to charge lighting system.
  4. 2-12 volt marine charger onboard loco 2 to charge those batteries.
  5. Arduino Nano (6 of them unused)
  6. Nano 3 expansion board so I can use screw terminals 
  7. 9DOF Razor IMU
  8. WAV trigger robertsonics (polyphonic sound playback board)
  9. TRRP connectors for MU 6 unused
  10. Ion Air Pro lite Wifi HD sports video camera 
  11. TRRP female female cables for MU (should be at least 2 maybe 4) 
  12. Four function radio switch, used in brake car
  13. The control guts from several scooters and power wheel toys
  14. Digitrax zepher and supporting system (have offered for sale several times)
  15. MP3 player YS-M3 SD MP3 playback module 
  16. Keyed switch
  17. A couple of 16x4 breakout boards
  18. Nokia 5110 LCD 

Projects
  1. Data logging of grade, curve, amp, volt and speed step for any my locomotives
    1. Have:  9DOF and a Nano
    2. Need:  volt / amp meter modules if not already on loco.
  2. Loco for use on home railroad / kids loco able to pull two loaded flats
    1. Have:  
    2. Need:
  3. SBT radio control
    1. Have: Sabertooth, nano
    2. Need: Radio system, amp meters, light control, batteries, 3d printed person for radio antenna, Onboard control integration
  4. SBT sound
    1. Have: Polyphonic sound
    2. Need: Speaker, amp, 
  5. Brake Car controlled by loco radio control
    1. Have: Working brake car
    2. Need: RX module
  6. Force sensor MU for Pipsqeek
    1. Have: Arduino Nano
    2. Need: Gauge, battery
  7. Dead rail On30 for Shay, 2 porters, 1 davenport, 2 trolleys
  8. Light for little library
  9. Camera system with 1 second time-lapse 
  10. Wireless MU (radio connection)
  11. Electric steam engine 4-6-0
  12. Caboose 
  13. Tool car
  14. New tenders for Pipsqueek
  15. 10-12 trucks to go with SBT, one with power assist
  16. Ballast tamper
  17. Gondola
  18. Box car (Sprayberry is working to offer a 1923 ARA steel car)
  19. Build Sprayberry coal car (waiting for trucks to come in the mail
My planned 3 trains: 
  • 1.5" Pipsqeek, baggage car (water tender), passenger car (fuel tender) with force gauge to MU loco and additional cars if desired. 
  • 1/4 scale SBT, 10-12 trucks as flats, tanks, and gondolas, 1 power assist (probably loco 2 with new cover)
  • 1.6" 4-6-0 DSSA or M&NE steam outline electric, M&St.L 4570 boxcar (tool car), wood reefer of a Michigan theme, working hopper car, NYC 418137 hopper car with On30 layout load, 6' composite gondola (Pere Marquette), 36' flat, 36' flat, DSS&A caboose.
Nancy's planned train
  • Tugger, Loco, pink utility flat, blue utility flat, wagon car

Monday, December 24, 2018

Finishing Projects

 
The coasters are getting closer to being done.  We sanded with 3000 grit paper and now that the shop has been dust free for a few days applied one last coat. 



Nancy got a french bulldog and was going to give it to a friend with a bulldog mix, I suggested painting it to match, it dropped and the legs broke off.  After an unsuccessful glue up I drilled a 1/16" drill to pin the offending leg, broke the bit off inside with glue surrounding to make a stronger joint. Then I added a tail with a piece of copper wire and green putty.

Then onto the painting, I showed Nancy how to do washes and dry brushing (dry brushing on wet paint melds in overnight... learn something new all the time.)  So we could get the markings correct we "borrowed" the dog for a few hours.

 The last task of yesterday was changing all my acrylics, they were upright in two boxes, making it hard to choose.  I made six trays to lay them in.  Then Nancy helped me bring down all the other boxes and I cut down and or divided them as needed.  Then I wrote the basic contents on the end.  The only thing left as multiple layers that probably should not be is the electronics boxes.  It was one box, now it is two layers of two, I should go back and make it four single layer boxes.

Sunday, December 09, 2018

Coasters

With the trains at work or stored in closets, sheds, boxes and garages it was time to work on another project.
 This week I took one of the pieces of wood from india that had promising grain (x) and cut it to size for coasters.  First was cutting to width, then in half for the thickness by ripping on the bandsaw.  Then sanding, lots of sanding.  Wore out the paper on my 36 inch belt sander.  I installed a new blade on the table saw and cut to width, more sanding.  Then some test finishes, beeswax, Howard feed-N-Wax, three different stains, and polyurethane.  We are not going to stain the wood as it hides the grain.
We are also working on the base for the trumpet lamp.  We plan polish up the base and the coasters with a really high grit.  The coasters will also get a backing, I think flannel.

Saturday, December 08, 2018

Trains at work

A coworker brought in some garland to work and considered it decorating their cube. 
 Nancy and I brought in two mountains, trains in On30, N, and 7.5" eleven rolls of wrapping paper.
 Four little trees, and some other stuff.  To one up them.   It started a full on war, there are now lights hanging all the way around the ceiling, almost every desk is decorated, and there is a festivus pole.
 With pipsqeek at work I started other projects, including wireing up a trumpet as a lamp.
 Making a winter scene in O scale for work.

And searching out articles of 4 wheel tenders for plans.

Nancy also helped me unpack the Sprayberry hopper car. 

For a $675 car it is amazing how much this car is going to cost me.  There is shipping of the car, the trucks, and the detail parts putting the total near $1400.  I have not yet added rivets, riveting tools, paint, decals etc onto the list.  There is a reason finished cars sell for $2600. 

Wednesday, November 28, 2018

Front bumper

Tonight I took off the front end sill of the locomotive and started playing around with how large I wanted the replacement.

I think a 7/8th by 10" by 1-13/16" beam looks about right.  It scales out to 6 inches above the rail and tops out at 2 feet above the rail.  I may add a step at the same 6 inches about 10 scale inches wide. 

By tucking extra steel between the frame I can get the weight of this piece up to 6 lbs.  The cab walls weigh 7 lbs, The roof of the cab 5 lbs.  Lead is 50% more, If I make the beam hollow I can increase the weight to 9 or 10 lbs.  If I use oak and fill with lead the weight would go back down... While I like the wood look I need the weight to balance the cab, and provide better traction. 

So in theory the tractive effort of my loco is 28lbs.  (.85)*Boiler pressure*Bore*Bore*Stroke/Drive Diameter. 0.85*90*1*1*1.5/4=28  The weight on drivers should be four times the TE... 115lbs.  The design loco is 66lbs.  My small boiler I think would be taxed by such a heavy loco, there are inefficiencies that should be accounted for so a final weight of 80lbs will give me a TE of 20lbs.  This is up about 6 lbs from when I bought the loco, and it ran quite well. 

Monday, November 26, 2018

Floor frame

 To make the floor frame I decided to repurpose the front floor holder.  I cut it in half and removed the locations other components occupied with a "hand mill."
 Robb meanwhile is considering trading his clishay for this.
 The frame looks good.
 Even better with the floor. Eventually I will get a new boiler that will extend into the empty space.
A sunrise shot on my way into work. 
The propane burner of my locomotive.

Earlier this week I was reaching into one of these dumpsters and felt a pop in my ribs.  It did not feel bad that night but over the next 24 hours it got worse and worse.  Then I rolled over in bed and felt another pop, it is feeling better.
Someday I want to give this machine the attention it deserves.  Currently it has no batteries or control system.
For now I work on the pipsqueek.  No idea why the guy that named it spelled squeak wrong, but they did.
It really did not take all that long to get the floor, this is parallel with the edge to within 0.001 so I am happy with my abilities. 
It fits quite nicely around the johnson bar.
A photo of my hand mill in action.  I have been cutting with my hack saw or band saw and cleaning up with the file. 
Cardboard and cab showing final length.  
A picture of the naked boiler top.

is this another morning or the same one again....
round and round and round it goes
Show me some stop lights
"why not start over?" he asked.
Ouch.
Looking good.
I wanted to build this thing for 10 years, now I have it.
So I am working on this.
So I won't have it for 10 years not running.
Use those muscles.
Spot the differences...
File a little more
Check the fit
yep looks good.
Maybe next year....
still headed in the right direction
It is worth the pain.
The work.
So I can ride the rails.
Into the sunrise.
Behind my own fire propelled locomotive.