Monday, January 01, 2024

Boxcar and Desk


 

I escaped from doing work between the holidays.  
So besides working on the vac pump, that I was going to use to put the top on my desk.  I started putting the remaining work into my boxcar.  The lumber door is a based on T&P 31919, it hinges down vs slides over.
The side door is based on St. Louis Iron Mountain & Southern.  A iron ore hauling railroad in Missouri.
I have had the grab irons and other details for months.  Just not in the mood to drill the holes and mount them.   Well really I wanted to not use typical Philips or slotted screws, but did not want to spend the money on scale hardware.  After seeing a car built with screws I said that is good enough and bought a box and went forward.  
For the desk top, I laid all my nylon and oak on top to hold the boards flats.  It would have taken too long to get the vac bag parts and starting with such a large projects was suspect to many opportunities for less than stellar results.
After putting the top on I flipped it over and added front and back edge banding to hide the plywood.  Tonight I cut the 4 edges to final dimension with a circular saw and a straight edge.
We also visited home depot to obtain round top brads to hold the hardware on.  
Most of the ladders went on fine, except the bottom rung.  For some reason nothing was cutting the angle iron.  New center drills, sharpened center drills, new drill bits for steel, old drill bits.  I had 24 holes 3/16" to drill through and it was not happening.  For the end grab irons I mounted just above the angle.  For the side and stirrups I used a burr to thin the metal and then punched out a hole with an awl.  Then used JB weld to glue the parts / screws in place.
The doors will not open on this car.  They are just for show.
I have to go research and learn how to set up the brake staff and air release valve.
I think I will add an airline to this car.  Not planning to have brakes, but having a line end to end gives options.  
An example of the holes needed for the bottom grab iron.

Looking at prototype cars for ideas.  And listening to podcasts, such as No Dumb Questions.

Sunday, December 24, 2023

Vacuum Pump and fittings

 

A while back I purchased a used Edwards Speedivac ED150 and cleaned it up and made it run.   but the instructions had this weird complex drawing of stuff at the intake that we had no clue how to replicate.  We could not figure it out so I set it aside.   For years.



KF40


A standard vacuum fitting flange, like there is an ISO version of it.  The drawing, it is of a complex way to change from KF40 to a glass tube.




So now we need to figure out what fittings we need.

My first project is to glue wood table top tight.  So I need a plastic bag and vacuum fitting.

For example this one from Amazon.  
A ball valve that will fit on that that so I can close off the bag from the pump. 
A hose strong enough not to crush.
A KF40 to hose connection.

That is the bare minimum.  
We should also have a pressure release valve.  
A regulator would be nice.

Then do it all again for a vacuum pot for degassing 

Saturday, December 02, 2023

Mullet River Caboose Kitbash

I decided to build my Mullet river C&NW caboose kit.  But I thought it was too long.  So I shortened it by 4'.  Or to say it another way I took a difficult kit and made it more difficult.  
Some parts like the copula I made per instructions.  

I removed the window above the desk off the right side

I made some shelves.  It looks like they were added by a second rate carpenter out of warped wood.
The modified right side and unmodified left side.
The left side was easy as I could just shorten the end on the middle and outer layer.  The inner layer had to be cut behind the copula to keep the slots for the rafters aligned.

At the end of the week this is how it looks.  The left side is unmodified.  Long bunk, opening for a stove, the copula, and a toilet.  The bunks are supposed to have front boards, maybe the seats lift for storage, I made the storage accessable from the front without having to move cushions or people. 
With the roof on.
The right side is modified,  The one long bunk was cut into two 6.5' long bunks.
The desk was moved from the center of the car to the end of the car.  
I plan to put a little bin between the bunks for coal or wood.  Add cushions.  I am not a fan of lewd things but some kind of personal touch will be done.

A lot of work left to do.  Painting, gap filling, details, lighting, underframe, trucks, handrails, ladders, door knobs, stove, teakettle, coats, chair.  The underframe is urethane representing a steel frame.  I want to back date a bit and represent a wood frame with arch or andrews trucks.  

Wednesday, October 25, 2023

Projects

  I was told not to work on the SBT programming for a while so I had to find other tasks.

One was a project I thought of for a while, a board shaped like Texas to carry tumblers for spirits.  
I made a template to use a router
The tumblers came from Marshals
The board is old growth teak that I wire brushed the front for a few hours to get nice looking.
The routed around a couple times to make a lifting edge
The end result is gifted to a united way auction basket.  Nice thing is it is paired with 5 liter of spirits so the auction is doing well.

A partial eclipse made for interesting shadows.
I also opened up the access to under the stairs so we could store more stuff in the house.

Projects I will never do.
cut the trunk off a 2007 towncar to make it look like the 1935 towncar.
Or replace the cab of a pickup with a small car.

Plans for O scale

 

A while back I showed the N scale I have,  I want to make Dioramas for to show off the few buildings an such that I have in N scale.  No need for a full on operating railway.  They could be part of a Freemo or ttrak modular group, maybe.
Now onto the On30 plans.   We (I) started a figure six layout with tall mountains with the idea that the kids would help run, build and such.  They never did.  I decided our space needed more flat storage than an unused railroad.   
At the same time I inventoried the On30, sold a bunch at the plano show, and have all the rest of the larger 4 axle equipment ready to sell at the O scale show.  What I will be left with is a bunch of porters, wood tippers, and shay and climax.  Plus a few pieces of equipment that can move people.   These all fit with my idea of a future operating railroad.

I also pulled a few of the plastic O standard equipment that could be surplus.  I have 10 wood freight car kits to build in that scale & gauge.  

I also inventoried the Live steam,  Pipsqeek, SBT, Mogul frame, and cars and talked about which are important and which are surplus.  Truthfully the two rolling standard gauge cars, and the unbuilt box car and Mogul are low on my desire list.

There are 7 model railroad ideas I have parts for here.
SBT train 1/4 scale on 7.5" track
Pipsqeek live steam train 1.5" scale on 7.5" track propane power
On30 tourist train
N scale diorama
O standard 15 car train
On30 operating railroad with 50 wood tippers
Mogul electric 1.6" scale and three freight cars and three riding cars.

I suspect I would have fun building the wood tipper railroad but after a couple years of ops I will be done with it as it is not that complicated.

It was cool to combine the 1/8th and smaller scales, I want to do that more.  The unbuilt boxcar I have here will be made in a way to be a diorama holder with lights overhead and viewing from the side, with the door opening and the entire side removable.  The diorama inside would have to be about 15" wide and 5' long.  This will work for the N scale diorama, or dioramas I want to build.  It is also a reasonable restriction to the On30 operational layout to build it in 15" x 5' sections.  I have always wanted to build bookshelf bases to hold a railroad on top.  While that does not work right now with the cats they could hold 15" deep railroad sections on top the same ones that would fit in the box car.

Other than live steam trains the longest I have had the same scenarized track is 5 years.  I expect that trend to continue, plan, build, enjoy, remove, plan, build...  Being sectional allows for better resource uses and storage.  I could build 10 section of a modular railroad, have 3 inside my home, the rest in storage, and then take all to a show.  Storage of small scale modules on the same format as live steam railcars gives flexible storage options for all trains.