Friday, November 20, 2015
In the way
Thursday, November 19, 2015
Standard or Narrow Gauge?
I am going standard gauge.
Why? Well I am designing this to be a workhorse loco for switching at white creek, those cars are standard gauge. Also I do not want a very tall car, and Nancy is asking for a boxcar. Well she wants a dynamite car, which would be narrow gauge, but to compromise it will be a boxcar. This NYC&HRRR car is going to be the basis of my design decisions. It will be to 1.6" scale like the coal car, and riding car trucks are.
Friday, November 06, 2015
Spending money
I have started on loco 2
Ordered wheels, axles, and jackshaft from Mr. Motion... less than two week turnaround
Ordered 2 500 watt motors off of ebay... today.
Next is deciding the ratio for the chains. Robb is running with a 7.4mph max, and has great pulling power, those that know on the Facebook Large Scale Railroaders Builders Group recommend gearing for a low top speed and running the motor at max RPM as much as possible. There was a recommendation for an even lower top speed. I think a 6 to 7 mph max is good for White Creek, that is what I find others and myself maxing out at, passenger trains stay on time at 5 mph. So I could go a little slower, I will talk it over with Nancy and Robb over the weekend and order next week.
The last important area is the pedistals and journals. I have eight sets here from Eaton, they are supposed to be for the spiral wheel cars behind the SBT. I could always order more as I think the spiral wheels will take quite a while to finish.
The loco will be about 30 inches long, use the PaceSetter center off board I bought last winter, the two large batteries, and I do not know yet if it will be a freight car or locomotive shape... leaning towards a gondola because of the lower height. For carrying in the van I will need to park it on the riding car.
The riding car will be 4 foot long, with the Tom Bee brake trucks Nancy bought this summer. I will put a box on the back for the air compressor, and have it in such a way that the loco will park on top. Cheaper than the trailer.
As for the coal car, I have most of the parts done, except the brake details on the top side, I am hoping to have the KD brake details made by Kevin Sprayberry and 3D printed. Looking at what we can travel with currently I can only take the car when the family does not travel... until we buy a trailer. I am holding off on the trailer until we have a better place to park it.
Wednesday, October 28, 2015
brackets
They are different in design than the O scale version, but I think they are plausible based on what I have seen at work.
Monday, October 05, 2015
U-Bolts
These u-bolts will be used to hold the airline in place on brackets.that hang from the body.
I found a wonderful reference PDF on the internet about USRA hopper cars. The LS&MS car on the cover is very interesting, a pressed steel offering. I am debating what to letter my car. NYC, LS&MS, MC, CCC&StL are all options I am considering.
Tuesday, September 29, 2015
gates
This last weekend was the IMLS meet. We went on Saturday and ran the batteries down on the SBT in 11 miles. I was riding fast with lots of kids on the train.
Today I picked up 20 feet of 1/2 inch L and 16 feet of 1/2 inch square. I then cut out 30 inches of the square and 55 inches of the L for under the coal car.
Saturday, September 19, 2015
Airline
Things slowed a bit after I grabbed the wrong spot.... ouch. But we got it done.
Monday, September 14, 2015
Details
Door latches
Bottom bracing
Trainline
Brake reservoir
ABD valve
Brake cylinder
Paint
Decals
Tonight's task was cutting 4 plates to use as the doors. These half inch thick by 3 inch tall sections are a fair representation of the hatches on the O scale car.
Sunday, August 02, 2015
Perspective
Robb - "Went out Saturday to help Fred at the railroad, ran two trains of sand from the cut to the fill. Then it rained, then I got to be engineer for two more runs."
Fred - "Ran four trains of sand from the cut to the fill with Robb. In the middle we got drenched with a torrential thunderstorm and had to race back to the car barn for shelter. When we got back a tree limb was down right where we were working."
What you remember and share depends on your priorities.
Tuesday, July 28, 2015
Too Busy Running
The loco has over 300 miles on it now. Tim pointed out at White Creek last weekend that they are inflated since my odometer is on a power axle, prone to slipping.
The loco has been to a track 31 times since last April. Heston, White Creek, ILS, IMLS, Mill Creek, EJ&K, Drent, CSX Valley Division.
July 23- 25 White Creek op session with a tent. Anna went with me to White Creek also, the first day she slept in the tent, the second day in a gondola. Well OK she did help with some switching but not much. The good news as we left I asked if she would return and she said yes. I gave her the bead I made at corning also.
The best time of Saturday, I was laying down in the gondola and Robb passed me at speed with a six car train. I felt like I was in the train, not on it or watching it. It still makes me happy even though it was only a few seconds long event. Robb was trying to make speed to get up a hill, within 150 feet he was stalled and told me he was still at full throttle. I coupled onto the back and we got up the hill at 1-2 mph. His controller limits his amps in order to not burn out the motors. I think his motors are undersized for the weight of his locomotive.
Here is a MU set of Plum Cove boxcabs pulling one of seven timed passenger trains running interference while we switched.
And because I did not post in June...
I made four boxes for under boat seats. All have storage. The yellow and red pair are mine, with dark grey seats. The other pair, painted light blue, are Robb's with his light grey seats. We gave Robb his when we dropped off the girls in Michigan for two weeks July 12.
That same weekend I bought a metal railcar, a four foot long coal car. It needs to be painted, Nancy is asking for Chessie, I would like NYC. First I want to add some brake details. Most likely it is a Bob Snipe car, or a copy of one. White Creek has a lot of similar cars in their collection.




