Wednesday, October 16, 2013
Tuesday, October 15, 2013
welded
Got the frame welded today. Only one rivet backed out, and it is a tiny bit out of square. The pedestal holding fixture worked well, the pedestals are all parallel, it is just the outer frame that is off.
Monday, October 14, 2013
Ready to weld
Today I lined the pedestal spacers to the outside frame, clamped them to each other and then drilled them with 0.185 holes so they are pinned in position for welding. I am slightly scarred to have this thing welded up. It is a scary hard to reverse step. What if something is wrong and I do not know it yet?
Sunday, October 13, 2013
Productive Procrastination
Yesterday the weather was really nice, and I had some trepidation about making the fixture to hold the 4 pedestals during welding. I used my time to make a fence behind the garage between our compost pile an the neighbors. They had some plastic lattice tied to a piece of rebar stuck in the ground, it was slumped over quite unatractively. Also the neighbors behind us had 6 ft tall fence atop a 3 ft wood wall. The fence was leaning into their yard, soft dirt from the backfill of the wall. I took a piece of 2x2 angle from work, attached one end to the 6 ft tall fence post, the other to the back of our garage, it is level and the fence post is now plum. I then added in a couple treated 2x4's to hold the lattice.
Today, after going to the Hampton train show, and taking a nap I cut and filed a 1x12 to hold the pedestals in position. It will work quite well. The next step is to drill 4 holes to match the pedestal spacers to the outside frames. This will make everything line up neatly for the welder without much fit and fuss. If we are lucky the 1x12 will catch fire during the welding...
Thursday, October 10, 2013
drill 8 times...
and the holes still don't line up.
It took some time attach the 4 coupler plates. I made the holes in the plates 0.185 and the holes in the end frame 0.171. The rivets are 0.184 in diameter. so I had to grind them down to 0.173 for the frame.
The next step is to weld it all together. But the question is, how do I do it and keep the pedestals in alignment and square to each other. I am thinking I will need to make a fixture to hold the pedestals while the frame is welded.
Wednesday, October 09, 2013
a movie and drill press
I also spent the time to install 3/4" plywood shelves on the lower two levels of the wall so I will now worry less about stuff falling onto the railroad.
Sunday, October 06, 2013
End step brackets installed
Today I drilled and tapped the holes for mounting the end sills brackets. A very satisfying operation as it adds a lot of detail to the machine. I just need to drill 12 more holes and the frame will be ready for welding. A session on Monday, one on Thursday it should be ready to go.
Saturday, October 05, 2013
Rivets Installed
After trying to use the proper method to install rivets of damaging the back side to make them stick and having 3 out of 4 fail I decided to use epoxy to hold the rivets in.
First I made a fixture so I could use the bandsaw to cut the rivets in half.
Then I mixed up small batches of epoxy, hammered in a few rivets, wipe off excess epoxy from the front side. Repeat.
I had left the rivets long so i could peen them over, so the last step was to grind the backside smooth with the dremel.
Thinking ahead, I am worried that the epoxies low melting point will make strange things happen when the machine is welded together.
Friday, October 04, 2013
coupler pocket done
Today I finished the second coupler pocket. They are not perfect, being hand ground instead of made on a mill. I guess if I want that perfection someday I can grind out the weld and make new ones.
Tuesday, October 01, 2013
Second Piece of Scrap
Today I made my second official piece of scrap. Pretty amazing given the amount of pieces I have made so far. Working on the coupler pocket one of the drill holes wandered off where I had marked it. Not sure if it was the center drill or the drill that shifted. It has to have been the centerdrill because on the second one the drill did a great job of lining up with the centerdrill mark.
I started forming the end of the centerdrill, a slow process that uses lots of dremel cutoff blades.