Monday, September 02, 2013

This weekend I made and used a template for rivit hole placement in the 8 corners.  Then used a 3/16" transfer punch to mark, a spring punch to deepen the hole, a center drill to start the hole and then a 3/16" drill to through hole 40 holes in the corners of the 1/2" thick bar stock. This is slightly less than half the holes needed for rivits.

The weekend was not without problems.  I was drilling the centerdrill too deep and eventually broke it off in the hole, both ends of the 1/16" - 1/4" style one.  I was told that I had my drill speed too slow.  I maxed it out to 3200 RPM and used a 1/8th" centerdrill to start rest of the holes.  Then at the advice of the manual & chat I keep the speed high to drill my 3/16" holes.  Burned up two drill bits on the first two holes.  Good news is I was able to clean out the holes no stuck drill bits.  Using my last drill bit I tried lowering the speed to 1500, 1000, 750, then 500 RPM.  The last two worked well, drilled the last 35 holes at 500 RPM. 

I also set the control board in place, I have to cut the ears of the motor mounts so it will all fit.  I am so worried about getting something bad into the motor and ruining it.  I guess I could have increased the length of the machine an inch or two to have more room.  It all fits in CAD, it should fit in real life.  Also at Nancy's urging I have started estimating how much of the steel stock I will keep.  The supplier is willing to reshelf any I do not use, charging me only for what I keep.  Their advantage is not cutting, mine is not paying to cut.  I am going to wait to do more until the pedistals they are cutting for me arrive, do some things like go for a bike ride.  I did turn the garden compost pile and play a game of tag with the kids in the front yard after dinner.

Saturday, August 31, 2013

Time to Start

The wheels finally came.  After measuring them I had to make some adjustments to the CAD drawing that took a week.  Thursday I sent a cut list of steel size to the steel vendor.  They were able to get about 1/2 of it next day, so Friday afternoon I picked up 8 12 foot long sticks of steel for the Jeffrey and riding cars.  5 more sizes are needed, plus some sheet steel.

The first cut.

I had to rearrange the basement so I had space for the sawhorse, a straight shot down the bottom of the stairs.  Robb suggested putting the saw onto a wheeled cart, I can tell you it was a great thing to do, but think about the weight of the machine when open, the rail on the cart is a counter balance.  
 This is what I had for trains this morning.  Nancy gave me the 16" tall mannequin for my birthday, he scales out to 5'4" tall.  Maybe someday he will have clothes.  Batteries are meant for a Schwinn scooter.  The Jeffrey letters are from Shapeways, 3D printed stainless steel.
Me setting up for cut number 2, tiny little adjustments so will not have much filing to do later.  The saw does cut at a 64th off square and the blade bows in over the course of the cut.  
 All four outer frame pieces cut and filed.

Saturday, August 17, 2013

Tools to make the Jeffrey

While waiting for the wheels to arrive Nancy and I have been reviewing craigslist for needed equipment.  So far we have added a Buffalo 4"x6" metal cutting bandsaw, a 3 ton arbor press, and a Enco 1/2hp drill press.





Wednesday, August 07, 2013

Waiting for Jeffrey

Nancy and I thought how nice it would be to have the parts for the Jeffrey and cars here by my birthday.  Did not happen.  I have added more details to the drawing, plus Robb started making wheels for two additional cars.  I will have the Jeffrey plus 4 more cars to pull.  A Generic Electric can pull 3 adults around a track all weekend without recharging so this thing should be able to pull the whole family.  Small scooter batteries will be under the deck and supplemental RV batteries will be the seats on the trailing cars.

Saturday, July 06, 2013

Jeffrey Update

I have the first pass of my drawings done, it was hoped that the drive wheels would be here by now, but alas I should have by mid August.  I also ordered the running gear for two trailing cars, they are also due in August.  I showed Nancy the estimated cost for the project, she stressed it better not cost more than that.

Saturday, May 25, 2013

I want a Jeffrey

In the July/August 2003 Narrow Gauge & Short Line Gazette Tim Stolle published a drawing of a Self Contained Battery Truck manufactured by the Jeffrey Company.  I said to myself, I want one of those someday.  Not in On30 as I usually model or Gn15 as Don Gage modeled below.

I wanted it in 1/4th scale ride on trains 7-1/2" gauge, like the car below.  I tucked the thought into the back of my head, and kept that issue on my nightstand for 10 years.  Many other magazines and books were read and shelved, projects made, moves completed, but that magazine was always nearby to look at and dream about.  Sometimes I would search the internet looking for more information but there was precious little on this machine other than the magazine or the model Don made.  That was until Google digitized the books and Harvard Library.  Included in that collection was Catalog #82 of the Jeffrey Manufacturing Company.  Not a treasure trove of information about this specific machine, I would have to write the company and ask for Bulletin #13A for that.  Well the company still existed, so I wrote them.  Tad, the grandson of the owner of the company 100 years ago wrote back to tell me that they did not have a copy of that information, nor blueprints of the machine.  

More internet searches, I found a library with a copy but wanted $25 per page to copy it, OK that is an option, but lets look more.  Library of Congress, did not have a copy nor did any of the Ohio historical societies.  But the Smithsonian did, it was on a whim that I had contacted them, and a kind librarian there emailed me not just the 16 pages of 13A but a total 83 pages of information about the Jeffrey Self Contained Storage Truck.  I may not have a blueprint but I had photos of all 4 sides and basic dimensions, I had descriptions of how the guts worked and information about trailing cars that could go with.  It was time to start drafting.
If I was going to make this ride on it needed to work, lots of internet searches saw people praising the Generic Electric by Plum Cove Studios.  While the body and frame was not right the motors, controller, and wheels would greatly simplify my work.   With my wife's blessing I ordered what I would need from them.  Now I have to wait for parts.

Thursday, November 08, 2012

Drop Bottom Gondola

 An overall shot of what is included.

 Another overall shot.  Click on the pictures to see bigger versions.
 This photo shows the parts used to make the cross bars, first take a flat piece, punch it with the two knives steel fixture, file it to size with the middle and turn the edges over with the third on right.  Not shown is a fourth half wedge that is also used, either on the middle ones or the end ones, i don't remember.

 This shows the parts to make and drill the openings for the centersill.
 This die set makes the end of the gondola

A photo of the end of the gondola, this is as I bought the car, ladders are HO scale, there are several dies to make those included, did not take pictures, they are in the upper right of the overall shot.

 Side of the car showing the bottom dump action.  All panels can be dumped, the maker of the dies suggested to me to make most cars as non functional or only have the center bays dump as it can interfere with the trucks.
 This fixture bends over the top and bottom of the gon sides.

Friday, May 25, 2012

Rules for new Christians

A friend was talking about how he did not want to go to church Sunday morning because he was drinking Saturday night.  His thoughts did not sit well with me... seamed he was concerned that he was doing something that Christians should not do.  Yet his faith is very strong.

Today I was reading Acts 15.  In verse 10 peter asks "why do we test God by putting on the necks of the disciples a yoke that we nor our fathers have been able to bear?"  Vs 21 "For Moses has been preached in every city from the earliest times and is read in the synagogues on every Sabbath."  Vs 11 "We believe it is through the grace of our Lord Jesus that we are saved, just as they are."

In the end it was decided that the rules for those that were not part of the Jewish faith that turned to the Christian faith are few.  Vs. 28-29 "It seemed good to the Holy Spirit and to us not to burden you with anything beyond the following requirements: You are to abstain from food sacrificed to idols, from blood, from the meat of strangled animals and from sexual immorality. You will do well to avoid these things."   These are the things that I as a Christian can strongly ask other Christians not to do.

But what of all the other laws of Moses and the profits?  Are they all for naught?  No I don't think so, they are good standards and practices to live by.  They are areas where over time the Holy Spirit will address on each persons heart.  And because America's laws are built on the laws of the Bible, following the Bible will keep a person out of trouble.  This is in line with what Jesus said in Matthew 22:37-40 about the greatest commandments.  'Love the Lord your God with all your heard and with all your soul and with all your mind.' This is the first and greatest commandment.  And the second is like it: 'Love your neighbor as yourself.'  All the Law and the Prophets hang on these two commandments.

I can't say for certain that my friend needs to change and do all the good practices I and other Church going people of the ages have done or not.  But to start my answer is no.  A new Christian has very few different rules to live by.  And admittedly even these bare minimums are difficult to follow for me years after becoming a Christian.

Sunday, June 19, 2011

luxury

I now realize that the reason I find so little difference between my life and luxury is not because of there is no difference between luxury and plain.  The real reason is because Nancy makes my life so luxurious that I think it is normal and so luxury is just rather bland expensive version of what Nancy does so well.

Thank you Nancy for keeping my life so far from plain.

Tuesday, June 29, 2010

The Future

I am trying to decide, should I talk about this future I am scared of or my past I am scarred from.

Lets just get this future idea out there and keep hiding my sin in a closet to haunt me.

Our Church, Prairie Lakes, has a simple idea of what being a Christ follower is.  The whole point boils down to:   Love God, Love People, Influence the World.

My idea is tied to the last two and driven by the first.

I think that there should be a network like Twitter, Facebook, or Flickr to serve people.  Something like Kiva that is more than money, it is time, and skills.  Quality results for God by lots of little people.  Big things done by lots of people pulling a little.  A melding of the power of social media and networking with physical action.

Somehow God is asking me to bring this idea out there.  And it scares me.  How can it be controlled?  Who is going to help me with it?

I am reminded of the well meaning intentions of a house mother installing drywall on a church mission trip. She put her heart into it, all her skills, it was what she wanted to do but she is not a professional drywaller.  The quality was just not there.   I think of the idea of the guy at the baptist church who week after week sings that special song that touches his heart, but is so far out of tune and rhythm that it takes the grace of God in everyone else to tolerate it.

How do we leverage social media with task that need to be done?  I don't know.  What tasks?  Easy ones like mowing an elderly person's yard.  Big ones like building a school at an Indian reservation.  It is on my heart to set up a platform so that the next time the pendulum of church activity swings towards service and reaching the world they can use the media available to find the opportunity that uses their skills and time to the best advantage.

It would be like a million Second Saturdays, Serve Eries, as well as summer mission trips, and who knows what else.  It would be the place churches would go to learn what they can do, for both big projects and small.

But we need to make sure that there is quality.  That skilled doctors and nurses visit and take care of peoples health issues.  That builders are building, teachers are teaching, engineers are engineering.  And Christ is in it all.

I am an engineer, a man of structure and form and God is asking me to plant a seed of a wild, fast growing, scary plant that will do good beyond measure, but it will also have failures to match.

The failures scare me.  But do they scare God?