Saturday, May 14, 2016

Battery Hold 2

 Today I made the outer battery holds and drilled the holes to mount on the frame.
 I was quite happy to see how matched the pair are.  I used my propane torch to heat the corners and bent it with a pliers.  It took several heatings to bend to the full 90.  After bending the first corner on each I made a story pole 10.25" long from a wood scrap and used to help bend the second corner.
Setbacks include my bandsaw blade breaking, good thing I had a replacement.  But the replacement is cutting at an angle.  I will have to play around to see if I can get it to cut square.

No comments: